Gilbert Epoxy Elite

Industrial Floor Coatings in Gilbert, AZ

Industrial floor coatings in Gilbert, AZ — chemical-resistant epoxy, heat-rated systems, containment detailing. Free estimates.

15+ Years local experience
500+ Projects completed
Licensed & Insured

Get a Free Estimate Call (928) 238-9790

Serving Gilbert and nearby communities.

Industrial spaces take a different kind of abuse than a garage or showroom, chemical exposure, heat from equipment, and constant heavy loads. Gilbert Epoxy Elite builds floor systems for process areas, manufacturing spaces, and facilities that need more than a standard epoxy roll-on.

Every industrial job starts with understanding what's actually happening in each zone. A chemical mixing area needs a different primer than a loading dock, and we spec the system per zone instead of coating the whole facility the same way.

Before & after

Before and after Industrial Floor Coatings

Before
After

Codes & permits

Permits and codes for Industrial Floor Coatings

Industrial facilities often carry additional regulatory requirements. Confirm permit and compliance needs with the Town of Gilbert and any applicable environmental agency before scheduling.

Typically needs a permit	Often no permit
Secondary containment systems tied to environmental compliance requirements	Chemical-resistant coating application
Structural slab repair affecting foundation integrity	Surface grinding or shot blasting prep
—	Static-dissipative or heat-resistant topcoat installation

Need help with permits?

Get a Free Estimate Call (928) 238-9790

Cost

What does a Industrial Floor Coating cost in Gilbert?

Pricing depends on square footage, the number of coating layers required, and whether chemical or heat resistance adds complexity to the system.

Project type	Typical range	What’s included
Standard chemical-resistant coating	$5–$8	per sq ft, novolac epoxy base with resistant topcoat.
Heat-resistant system	$6–$10	per sq ft, specialized coating for areas near process heat.
Containment area detailing	$1,000–$4,000,	coved bases and spill containment zones.
Static-dissipative flooring	$7–$12	per sq ft, for sensitive electronics or combustible material areas.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate Call (928) 238-9790

Next step

Request a free estimate and we'll evaluate each process area before quoting.

- Home - Contact

Get a Free Estimate Call (928) 238-9790

Industrial Floor Coatings

Get an Industrial Floor Coatings estimate in Gilbert

Questions about this?

Get a Free Estimate Call (928) 238-9790

DIY vs pro

DIY vs hiring a pro for Industrial Floor Coatings

DIY	Hire a pro
Standard epoxy kits break down fast under industrial chemical exposure	Chemical-resistant primers are matched to the specific substances in your process area
No access to novolac epoxy or static-dissipative formulas	Multi-layer build-up is applied correctly for required thickness and strength
Containment detailing requires trained application, not a roll-on fix	Containment zones are detailed properly for spill control compliance
Getting chemical resistance wrong risks coating failure and costly downtime	Extended cure testing confirms the floor is ready before operations resume

Not sure DIY vs pro?

Get a Free Estimate Call (928) 238-9790

FAQs

Industrial Floor Coatings FAQs

What makes industrial coatings different from standard epoxy?

Industrial systems use chemical-resistant resins like novolac epoxy and often require multiple layers for heat or chemical exposure.

How do you handle different needs across one facility?

We assess each zone separately and spec a system matched to what happens there, not one blanket coating.

Can the coating handle heat from nearby equipment?

We offer heat-resistant coatings specifically for areas near ovens, motors, or other heat-generating equipment.

How long does an industrial coating take to fully cure?

Most systems need extended cure time, often several days, before returning to full operation.

Do you handle containment area requirements?

We detail coved bases and containment zones as part of the coating process when needed.

Materials

We offer static-dissipative coatings designed for environments with combustible dust or materials.

Questions on materials?

Get a Free Estimate Call (928) 238-9790

What's included

What's included with Industrial Floor Coatings

Typically included: aggressive surface prep, chemical-resistant primer, multi-layer coating build-up, standard topcoat.

Optional: containment area detailing, static-dissipative coating, heat-resistant layers, extended testing documentation.

Customer prep: clear and isolate the work zone per your safety protocols, coordinate shutdown timing with our crew for phased installation.

Want a clearer scope?

Get a Free Estimate Call (928) 238-9790

When to call

When to call for Industrial Floor Coatings

Call if your current floor is breaking down from chemical exposure or constant heat. Call if you're setting up a new process area and need the right coating specified from the start. Call if containment or compliance requirements mean standard coatings won't cut it. Request a free estimate and we'll walk your facility zone by zone.

Seeing warning signs?

Get a Free Estimate Call (928) 238-9790

How it works

Our process

Step 1
Process Area Evaluation
Each zone is assessed for chemical exposure, heat, and heavy equipment use.
Step 2
Aggressive Surface Prep
Shot blasting or grinding removes contamination and old coatings thoroughly.
Step 3
Chemical-Resistant Primer
A specialized primer is applied to resist harsh industrial substances.
Step 4
Multi-Layer Build-Up
Several coating layers are applied to achieve required thickness and strength.
Step 5
Containment Area Detailing
Coved bases and containment zones are detailed for spill control.
Step 6
Extended Cure & Testing
The system is cured fully and tested before resuming operations.